Electrical Specifications
Sample Rates
96kHz, 88.2kHz, 48kHz, 44.1kHz or external.
Frequency Response
|
Sample
Rate |
44.1kHz |
48kHz |
88.2kHz |
96kHz |
|
+0/-0.1dB |
20Hz-20Khz |
20Hz-22kHz |
20Hz-41kHz |
20Hz-44kHz |
|
+0/-3.0dB |
5Hz-21Khz |
5Hz-23kHz |
5Hz-42kHz |
5Hz-46kHz |
Digital Inputs/Outputs
2 AES and 2 S/P DIF at 44.1-96kHz. AES relay bypass at power down.
Analog Input (XLR Balanced Inputs)
|
Impedance |
>20kOhm, bridging |
|
Full Scale Input Level |
26dBu |
|
Dynamic Range |
>100dB |
|
Signal to Noise Ratio |
>100dB, A-weighted |
|
THD+N |
<0.002% @ 1Khz, -3dBFS |
|
Crosstalk |
<-100db @ 20 Hz to 20kHz, -1dBFS |
Analog Output
|
Impedance |
<50Ohm |
|
Full Scale Output Level |
26dBu |
|
Dynamic Range |
>110dB |
|
Signal to Noise Ratio |
>110dB, A-weighted |
|
THD+N |
<0.002% @ 1Khz, -3dBFS |
|
Crosstalk |
<-100db, 20 Hz to 20kHz, -1dBFS |
Additional Specs
|
Maximum Delay |
21 Seconds (mono, 48K sampling) |
Remote Control Inputs
Up to 2 foot pedals (or 0-5V control inputs), or 6 footswitches, or combination.
MIDI Connections
5 pin DIN output and thru.
7 pin DIN input with output capability and external power jack.
Power
25 watts 100-125V, 220-240V, AC 50/60Hz, no voltage switching required
Size
|
Inches: |
1.75h x 19w x 10.5d |
|
Cm: |
4.45h x 48.3w x 26.67d |
Weight:
12 pounds (5.5 Kg) net, 17 pounds (8Kg) shipping weight
All specifications are subject to change or improvement at any time without notice or obligation.
This page created 04 October 2002
Return to Eclipse page
Return to Eventide Home