| Impedance nominal 10k ohms, balanced.
| Maximum level +24dBm.
| Full dynamic range from -4 to +24dBm levels.
| XLR-type female connectors.
| |
| Electronically balanced.
| Maximum level +20dBm into 600 ohms.
| XLR-type male connectors.
| |
| Less than .02% @ 1kHz, reference level. |
| 90dB from clipping to noise floor. |
| 2 Channels, each with 10 seconds maximum delay.
| Internal DIP switches adjust maximum delay in automatic modes to 4, 6, 8, or 10 seconds.
| Manual delay adjustable 0-10 seconds from front panel in 1 millisecond steps.
| Internal DIP switch allows manual delay adjust to 20 microsecond steps.
| |
| Standard 19" (48.26cm) rack width.
| Height equals two rack spaces - 3 1/2" (8.89 cm).
| Depth 12 1/2" (31.75cm). | |
| 115/230 VAC.
| 50-60 Hz.
| Nominal power dissipation 40 watts. | |
| Remote activation of DUMP button.
| Relay contact closures (both normally closed and open) when delay margin is 0 to 1/2 maximum time.
| Relay contact closure (normally open) upon count down to 1 in WAIT & EXIT mode.
| Remote activation of either WAIT & EXIT or RAMP TO ZERO mode (chosen by internal DIP switch). | |
